Thursday, 27 July 2023
Headgear in the First World War
As a modeller of First World War scenes, you may have wondered whether French soldiers sported the képi (cylindrical peaked) hat or casque (the characteristic French helmet). The brief answer is that in 1914, the majority of infantry sported the képi. This was an improvement on the massive shako and the bicorne hat - massive headgear which made it impossoble to move without being seen. There were exceptions; mounted troops wore helmets as protection if they fell off their horses. See below.
Our thanks are due to Raymond Péchot, Péchot's grandson for allowing us to reproduce this photograph. All rights reserved. The képi is much in evidence in this picture of a naval gun taken in 1886. The officers and other ranks standing around the 240mm gun belong to the Gunners/Artillerie. They are wearing this form of peaked cap so typical of the French military. Other personnel come from the Marine Service. Prosper Péchot, see below, can be seen, mounted, at the centre of the picture. He is wearing the Artillerie version of the képi.
The story behind the picture is interesting. The Marines in the picture are moving a large naval gun as part of an exercise performed every year in the 1880s. As the reach of the French Navy increased, so they wanted to be sure that they could land a force de frappe bristling with guns on any beach in the world. As guns got larger, however, they realised that muscle power alone was not enough to drag a naval gun up the hill at Fontainebleau. In 1885, they turned to Péchot to solve the problem which he duly did, with his system of portable railway. Equipment was all ready for the annual exercise in July 1886. The chocks in front of the nearer bogie hint at just how steep the gradient was. You will be relieved to know that the detachment reached their objective in good time for lunch! This would have been impossible without the Péchot system.
The képi survived to the time of the First World War. An advertisement appearing in the magazine ‘Illustration’ - author's collection - in June 1916 shows officers of the French and British Army are shown mostly in peaked caps, though there are two ceremonial helmets to be seen.
Other illustrations from the same magazine show how the képi was a notice-board for regiment and rank. The barrel of the hat displays a useful code of identification. They had all earned citations (cit). Here is a lieutenant of the 4th Colonial Infantry,
a lieutenant of the 13th Infantry (headgear worn rather cheekily in the photo,
a lieutenant if the 9th Engineers
and a Captain in the 66th Infantry.
All illustrations are from the author's collection.
Once the First World War started, even Top Brass began to notice various new aspects of the fighting. Losses among the infantry were horrendous. While waiting for the breakthrough (which never happened on the Western Front)the mounted regiments were also put into the trenches. It was noticed that though they suffered losses, these were not as tragic. In a Report of 17th February 1915, High Command noted:
The overwhelming majority of our casualties sustained head wounds. In the majority of cases, they would have been protected by a metal helmet. This headgear would have, in the first case, protected them against shell-bursts and flying shrapnel which do not have great penetrating power. They would also have stopped the dangers of ricochet from spent bullets. Statistics bear out these observations. Our cavalry suffered far less than the Infantry. (Note: when fighting in the trenches, the cavalry kept their traditional helmets.
The Infantry also tried by various shifts to protect their heads. Some attached their mess –tins to the top of their hats. A patriotic industrialist devised a calotte, a metal skull-cap to be worn under the képi. The design was trialled at the defence laboratory at Bourges. Unfortunately, a one-size-fits-all skullcap did not fit everyone but where they could be worn, they were effective against 60% of shrapnel and spent bullets. 700,000 of these calottes were distributed and research on a better design went ahead.
The result of this research was the casque or helmet, an improved version of the one already worn by mounted regiments. The design originated from the Crimean War, the so-called pot-hat of the sappers of Sebastopol, which was in turn taken from the head protection worn by light cavalry.
The colour chosen was gun-metal grey, reminiscent of military equipment, especially the 75mm gun. A grade of steel which provided protection from flying bullets was chosen. It and the integrated visor/rim was punched from a single piece of metal. The crest of the cavalry helmet was reduced to a discreet ridge. This gave the helmet extra rigidity but also featured perforations for the better circulation of air. For comfort it was lined with an inner helmet of leather, a suede leather chin-strap held it in place. It was carefully designed not to interfere with movement, even under fire, the whole weighing well under 700 grams.
A single design of casque was worn by the humblest to the most senior when in the field. Members of the various branches of the army carried a different device on the helmet. The infantry – as in the illustration - were distinguished by a stylised grenade, the Chasseurs, a hunting horn, Colonial troops an anchor, the Sappers a stylised breast-plate and helmet and the Artillery the crossed cannon device. Personally, I find the insignia both familiar and a little disturbing. In the British Army, the Sappers wear the grenade insignia. I also find the crossed cannons of the Artillery just a little reminiscent of the Confederate insignia and the fasces. But that is personal. My personal picture of Prosper Péchot’s benevolent face never includes that particular casque; indeed, he would never have worn it.
Tradition was not dead. The képi, affectionately rather than respectfully known as the pioupiou, continued to be worn. It appeared straight and solemn on parade but when marching or off-duty, quite possibly at a jaunty angle as modelled by the cheeky young Lieutenant Blanc.
As a quick postscript, the système Péchot featured in the photograph above became very familiar to the casque-bearers of the Great War. From light, prefabricated track supporting a few specialist bogie-wagons, it evolved into THOUSANDS of kilometres of permanent way carrying munitions, engineering stores, food, water and forage for animals forward to the Front and spent ammunition to be recycled and the wounded back to base.
Thanks are due to the Péchot family for allowing me to reproduce pictures from their family archive. Other illustrations are from the author's collection. Copyright
Further Reading: WJK Davies - Light Railways In the First World War (out of print); Dr Christian Cénac - 60 centimetres pour ravitailler les Armées francaises pendant la premiere guerr mondiale (out of print)
Sarah Wright - Colonel Péchot: Tracks To The Trenches Birse Press 2014
Wednesday, 12 July 2023
The Pechot Memorandum
As a young man, Prosper Péchot studied at the prestigious Ecole Polytechnique in Paris. Those who passed the entrance examination were already graduates of prestigious institutions with the equivalent of a degree in mathematics. He would have enjoyed the company of such luminaries as Lionel Penrose, Laurent Bartoldi and André Henriques if they had been around at the time. Unfortunately, he died in 1928, but here follows my little flight of fancy.
While at Staff College, 1880 to 1882, he was given the standard puzzle of the day, how to regain the Lost Provinces of Alsace-Lorraine. These were conceded to the new German Reich in 1871 at the conclusion of the Franco-Prussian War. The city of Metz was considered the key to a successful campaign. It was well-defended with the finest fortifications of the period, massive structures proof against siege guns of the time.
Prosper Péchot reasoned that if the present guns weren’t big enough, larger ones would have to be used. Such guns existed and had indeed been used. During the lamentable war, the French had brought naval guns up the Seine and positioned them around Paris. The Prussians never actually took Paris. It had surrendered in January 1871 after a grisly siege when cold, hunger and disease had each taken their toll.
If you want an idea of the area defended by these guns and how such guns were moved into position, look at a map of modern Paris. Although now surrounded by urban sprawl, its most distinctive feature is the péripherique road which encircles it. This was built over the defences of 1870. Though warfare is no longer actually waged, a drive can be a somewhat unnerving experience for a visitor. The map has other interesting features. The main motorway intersections are still called ‘Ports’ recalling the time they were defensive gates on the road to Orleans etc. It is pierced by a number of obliging rivers, twice by the Seine and once each by tributaries such as the Marne. It’s not too much of a stretch to call it the Isle de France!
There was, however, all the difference in the world between transporting naval guns by ship and dragging them – and their heavy ammunition – overland to a convenient position within range of an enemy fortification. He envisaged guns whose barrels alone had a mass of 34 tonnes and a total daily passage of freight of over 2000 tonnes. Péchot had the solution and he had seen it at work, well, sort of.
In the 1870s, Paul Decauville the French industrialist had developed a portable railway for use on farms and quarries. There is quite a difference between a barrow-load of sugar-beet and a large gun, but Péchot had resolve, imagination and a grasp of mathematics. The Péchot system was born.
He seized his pen and turned a College exercise into Memorandum which, hardly out of Staff College he sent straight to the top, to the Ministre de Guerre – ministry of Defence we might say. It was a snappy document. With a small preamble, in the paragraph entitled Description, he explained the purpose of his system. ‘A means must be found to carry components weighing up to 34 tonnes and a significant mass of smaller freight.’
Hoping that his readers shared his enthusiasm and would read on in excitement, ‘Trials indicate that a portable railway could do this.’ Trials had proved that an adapted version of the existing Decauville railway was suitable. Unfortunately, as it turned out, his readers did not share his enthusiasm and it was a long time before the système Péchot was adopted. His claims were justified, both by mathematical theory and experiments in the field. Paul Decauville helped with the latter though, sadly, in the end his efforts did not receive due recognition.
We come back to the mathematics. The Decauville system was ideal for transporting carts carrying 0.5 of tonne, a relatively easy ‘push’ for a human or 1 tonne, well within the capabilities of a horse. Decauville prefabricated rail looked like an adapted ladder with some rungs missing; such rail was quite adequate for the force with which each axle of these carts pressed down. If, however, such wagons were overloaded, the rail would distort. To ensure a better match, a/ the rail could be strengthened b/ the number of axles could be increased. What about c/ a judicious increase of each? We can imagine a ‘sweet spot’ where the two lines intersected on a graph.
Firstly Péchot found the theoretical ‘sweet spot’ and then he experimented at Decauville’s factory.
As we have seen, the patron helped, with specially made track and wagons. Péchot devised ‘a track using rail of 9.5 kilogrammes per metre.’ He supplied a drawing of a 5m prefabricated track panel supported by 8 improved sleepers to be coupled with Decauville-style fishplates. These could resist a force of 3 ½ tonnes ie support a mass of 3 ½ tonnes.
Secondly, in order to take serious loads, he proposed the use of bogies instead of simple wagons. Although not unknown, the bogie was an innovation in this context. If each load were supported supported by a suitable number of axles, load-bearing was vastly increased. Two axles (ie four wheels) could safely convey a mass of 5 tonnes, three axles for 9 tonnes. By using pivoting links, such axles could be multiplied, if not infinitely, many times at least. See picture above.
There was another issue, that of the track gauge. At one extreme, was the prefabricated track used by Decauville and others. A gauge of 40 cm was convenient for transport over ploughed fields and inside factory settings whereas national French railways used Standard Gauge. Broader gauges such as those of the British Great Western Railway and the railways of Imperial Russia also existed. Theory suggested that 60cm gauge offered ‘the best of both.’ A rival system dreamed up by the Génie (Engineers) branch of the French army came to grief wherever their system arrived at the gate of a fort – too narrow.
A railway of 60cm gauge could tolerate a turning circle of 20 metres – track panels of this radius were available. There is a theoretical minimum which was later explored by Lionel Penrose. His son, Roger, created mazes for railways; the train had to get from A to B without making any excessively sharp turns. The illustration shows ‘allowed’ and ‘forbidden’ routes on a railway.Forbidden are marked in red. Péchot had to devise many mazes of the sort shown below right and if Penrose puzzles had existed in those days he would have enjoyed them.
There was another design point where Péchot’s strong mathematics helped. He realised that his system needed a smooth transition between curved and straight track. He appreciated the Euler spiral. This puts into mathematical language what the eye can see. Its curvature of 1/r where r is the radius of the best-fitting circle at a given point, is proportional to the distance along that line. A graph shows this. At the origin, there is no curve – it’s a straight line. At the two ends of the spiral, the curve is infinitely tight. To get your curved and straight lines to meet up smoothly – otherwise your train will fall off the track – just calculate the correct value of r.
Sadly, Péchot-style track was used on an industrial scale during the first world war. This picture shows a British War Department railway in action in 1917.
As Hannah Fry would say, ‘mathematicians aren’t the ones who find it easy. They just enjoy how hard it is.’ Prosper Péchot would smile.
Further Reading
Roy Link: Albums of the First World War RAM Publishing
Roger Penrose: Railway Mazes from ‘A lifetime of puzzles’ Ed, Demaine et al, Wellesley 2008
Professor Ian Stewart: ‘Casebook of Mathematical Mysteries’ Profile Books 2014
Sarah Wright: ‘Tracks To The Trenches: Colonel Péchot’ Birse Press 2014
Monday, 1 May 2023
We are back
After a gap of getting on for two years, and attending the first attending our first Garden Railway AGM in three years, we had our most successful show ever.
Looking forward, we are looking towards a slimmed down Wrightscale, keeping going for at least the next couple of years.
One of the reasons for the success of the Show was, after three years of slow progress through COVID and many personal changes, we were able to deliver eight out of ten Baldwin Gas Mechanicals. We have pictured one of these below, resplendent in its French Horizon Blue livery.
This is the fourth batch we have built over the years. The cab windows are now glazed and the headlight and rear light are illuminated. We used 2mm warm white LEDs. They really do look like incandescent electric lamps.
This batch of engines, like the last, completed about six yeards ago, are powered with 3V-12V COMO 62:1 gearhead motors. They drive through a final 1:1 bevel. These motors only draw 100mA under load and should give a few hours of running on the 12 AAA battery pack.
Saturday, 3 July 2021
16mm Couplings
Firstly, we are very sorry to have missed the 16mm AGM at Peterborough. We were looking forward to seeing old friends and customers, catching up with the news and gaining valuable feedback. It was a loss.
When we made our booking, we were confident. We were both double-vaccinated, as, no doubt, many other attendees would be. The chance of catching COVID was much reduced, we thought, as was the prospect of passing it on to others.
As we came nearer to Saturday 26th, there were alarming rumours that the coronavirus was mutating. No-one was sure whether these new forms might, or might not, affect people even though they had been vaccinated. In the end, no-one could prove a negative without time to gather evidence. We felt it safest to stay away. As you all know, we feel that our 16mm group are friends, and wouldn’t it be terrible to pass on something to our friendship circle?
We cancelled. Thank you everyone who has got in touch. Yes, we are fine. We weren’t kept away by illness.
Instead of going to the Show, Malcolm has been at his workbench, putting together the 16mm scale Baldwin Gas Mechanical locotractors. We are pleased to send you photographs of progress.
We have also been involved in ‘live running’ with friends. There is nothing quite like putting a model, however beautiful, through its paces on scale railway track. Although rolling stock looks perfect on the bench, once they start moving, problems become apparent.
When making up a train of wagons which had been designed by another hand, we became conscious of the modellers’ dilemma. We all want our models to run as well as possible as long as they are as accurate as possible. The design and making of models is the art of satisfying these competing demands.
Like any art, it can lead to slightly surprising results. On this particular running day, the problems were with the couplings. There are several proprietary model couplings which serve the modeller reliably, attaching and detaching as required. The only trouble is that they are underscale, overscale or generally non-prototypical. The wagon in question (not Wrightscale, but a beloved item in Malcolm’s treasure chest) had beautiful ‘deadscale’ couplings. They looked the part but kept on detaching mid-run. Malcolm is still wondering how to fix the problem without losing the look.
While moving along this track, so to speak, here are some thoughts about couplings as used on the Péchot system. As our friends know, this 60cm gauge system was devised by Prosper Péchot in the 1880s for the service of the French artillery. He used the designs of Paul Decauville, famous for his prefabricated agricultural railways, and improved them. His system was portable and relatively lightweight, just like the Decauville, yet it could carry significant loads, such as were needed by an army in the 1880s.
Among the improvements designed by Péchot was the coupling. The drawing shown here is reproduced courtesy of the CAA, France. It was drawn in the 1890s as coupling to the twelve tonne six-wheeled bogie, but the general proinciples apply.
Each bogie had a fully sprung buffer-coupling at one end and a tampon sec at the other. The literal meaning of sec is dry; in this context it meant with very much simpler springing. The link was completed with chains, to be fixed to the next item of rolling stock. Part of the genius of the design was that the link was between bogies, rather than the wagon superstructure. The bogie springing compensated for roll, dip, sheer and shock and generally kept the train moving, even on poor track.
Though many authorities dislike admitting it, the German army copied the Péchot design. They then improved it. Their bogie-mounted coupling was a ‘sprung balance’, lessening the need for elaborate springing in the body of the bogie. Because one small part had to do so much, the German wagons were relatively short-lived. In contrast, many Péchot bogies survive to this day.
The Péchot story is fascinating, full of human interest. 25 years later, his system and material inspired by it were used by both the Allies and the Central Powers during the First World War. Descendents of the Péchot coupling features on French, British and AEF rolling stock.
The Baldwin Gas Mechanical was devised in the USA for use in Europe by both the American Expeditionary Force and the French Army. It was supplied with couplings reminiscent of the Péchot original, as photographs in the maker’s ‘Instructions for operation’ attest.
Rolling stock also benefited from the Péchot design. As well as the Pershing bogie, the AEF commissioned and used rolling stock which had ‘family resemblances’ to the Péchot design. Rich Dunn has a useful page showing both styles. Though ubiquitous, the Pershing style did not have the sturdiness and manoeuvrability which characterises ‘son of’ Péchot, as can be inferred from Dunn’s text.
Back to our models; this view of the end of a Wrightscale WD Class D bogie open wagon shows a compromise between deadscale faithfulness to the Péchot-inspired original and the rough-and-tumble of a 16mm group fun-run.
Illustrations 53, 54 and 55 in Light Railways of The First World War show prototypes. The sharp-eyed reader will point out that the coupling on the WD model has an addition, a tried and trusted proprietary link pin. Easily joined and released, it makes running a live steam model rather easier. As mentioned above, modelling is the art of reconciling irreconcilable aims, deadscale accuracy and function.
If you think about it, life is like a model railway. It is partly rules and partly trying to escape them.
WJK Davies Light Railways of the First World War David and Charles 1967 The book is unfortunately out of print, but in the archives of the Imperial War museum, useful three quarter shots can now be seen online.
Rich Dunn Narrow Gauge To No Man’s Land Benchmark 1990 especially page 113
Sarah Wright Colonel Péchot Tracks To The Trenches Birse Press 2014
Wrightscale 16mm Baldwin Gas Mechanical in progress. No coupler has yet been fitted!
Saturday, 19 June 2021
Soldering Live Steam
Dear customers and friends of Wrightscale, we are sorry to announce that we can’t attend the 16mm AGM and convention at Peterborough this year.
Photo of 16mm Wrightscale Wren
The 16mm AGM has been the high point of the year for Wrightscale since the 1990s, a chance to meet our friends and customers, make sales and purchases and keep up with events in general. Your valuable feedback has also been important, usually complimentary, but sometimes critical. We appreciate everything you have to tell us.
We took the hard decision when we found that the country wasn’t opening up from lockdown as fast as we had hoped. In spite of all the precautions and vaccinations, COVID seems to be spreading again. The Westminster Government is putting restrictions in place. The Holyrood administration is also banning Scottish travel to certain parts of England. When one ban is in place, more will follow,
It was a case of looking at a rising graph and wondering how it would look a week from now. If it were just ourselves we should consider, we might have taken the risk – we have had our Astra-Zeneca-Oxford jabs. There are, however, going to be two thousand of us passing through the hall, traders, public and stewards. We felt it was unfair to come into contact with strangers and pass on some combination of virus which might turn out to be unhealthy.
We hope our friends will stay in touch by telephone or email,
In our last blog, we were considering the challenges of sticking a locomotive together. There is no ‘one size fits all’ glue or solder. For the Baldwin Gas Mechanical model, a locomotive that is operated by electricity, low-melt solder (max 400 degrees Celsius) will do. At a pinch, glue could be used throughout.
For Live Steam, such as the Wrightscale Wren, a selection of tougher solders are required.
The prototype Wren was designed as a small, light locomotive for temporary track. It needed good adhesion so that it could pull long trains of small wagons, but high speeds and long endurance were not so important. The main use of the prototype was the unglamorous job of hauling skips off a construction site.
Here is a Wren, Thomas Wicksteed built to authentic prototype plans, photo courtesy Jim Hawkesworth.
We can see how the prototype satisfied the criteria. What was needed was a locomotive with a small wheelbase. It had to be light so that it could be used on poor track but have a minimum number of wheels to ensure maximum adhesion. Thus the 0-4-0 T configuration, no tender, no trailing truck, all weight concentrated over the driving wheels. The frame of the prototype was therefore small and light, as is the frame of the model.
After discussion about building a satisfactory 16mm model, David Smith of Modern Outline kits drew up a design based around nickel silver etches. Nickel silver is malleable and ductile – bendy to you and me – but the genius of a David Smith design is that once the metal is folded up and reinforced where necessary, it becomes rigid.
There is a big ‘but’. The folds must be perfectly aligned so that the forces applied to the model behave exactly as calculated. A David Smith etch anticipates this requirement. Each piece is etched right through at its edges and at certain other places – more later - but only partially etched at its foldlines.
The frame part can easily be cut from the matrix and then easily folded up. When we say ‘easily’ there are certain considerations. While the frame is still flat, check the holes for the bearings for size and open them out slightly for a snug fit. Malcolm recommends using a vice with smooth jaws to do the bending so that the metal is always fully supported. Several parts are needed to complete the frames; with care, they fit together thanks to the slot and tab construction. Each tab on the outside of a part can be placed into an answering slot etched inside another. This sub-frame is reinforced with overlays.
Photo of 16mm Wren chassis by Malcolm Wright
Before soldering up, the axles and wheels should be ‘tried for size’ then comes the first solder. We recommend a high temperature; otherwise, as further parts are soldered on, the first solder will melt. For the Wren, this would mean ‘silver solder’. Malcolm recommends Carrs 188 silver solder paint – also known as paste.
Soldering takes place at temperatures higher than 618 degrees Celsius – more likely 740 degrees. It will of course stay firm if low-melt solder (up to 400 degrees C) is used subsequently.
The parts to be soldered should be thoroughly cleaned before and after. Always wear gloves and proper eye protection. Solder paste has flux mixed in though some like to pre-paint the area with extra flux. Malcolm recommends a ‘self-cleaning’ product. Such flux is basically phosphoric acid. This is a good thing when used for its proper purpose, but potentially dangerous.
This is the main reason why Wrightscale boilers and burners are supplied ready-made. We wear the gloves and eye protection so that you don’t have to. For obvious reasons, this is Live Steam after all, boilers and burners have to resist high temperatures.
For the small but vital jobs – quartering the driving wheels and setting the valve events, a quality engineering retainer such as Loctite 601 is used. It requires a short period to ‘cure’ and so the timings and events should be checked before it has cured ie set firm and I mean firm!
Other ‘glues’ and sealants used in making the Wren include instant silicon gasket – Malcolm recommends the Haematite product. This is vital for holding the valve chest and is applied in a 3mm band to the top edge. The valve chest top is lowered on and screwed into place; tight enough to get a small ooze of sealant. Over-tightening the screws means that sealant goes everywhere except where it is needed.
View of the Wren locomotive from the back, photo Malcolm Wright. Rather similar observations apply to the exhaust sealant. This is used where the steam-pipe goes through the burner flue and also to seal the back of the burner. This stops leaks and controls the air supply to the burner.
Monday, 24 May 2021
Glue or solder?
Solder, engineering bolts and glue are essential to our Wrightscale models.
There are a variety of ways in which an item can be fixed and so what follows is a series of recommendations, in short, how Malcolm likes to build his locomotives.. We’ll leave the problems of soldering live steam for another blog, and concentrate on the Baldwin Gas mechanical.
The BGM model chassis is built on a flat surface – a sort of jig if you like. The front and back buffer beams have to be fixed to the side frames ie the basic ‘box’ of the locomotive. The assembly should be checked for ‘squareness’ of course. Malcolm uses a metal square, to check that each corner is a right angle as you secure the frames with the nuts and bolts. As a final check, make sure that the diagonals are equal which they will be if the rectangle is a true one.
Then it is time for the solder. As the frames are made from laser cut steel, a high-melt solder could be used, but, unlike with live-steam construction, low-melt solder can be used throughout.
Low-melt or soft solder has a melting point below 400 degrees Celsius (752 Fahrenheit) and is normally used with a flux. Flux cleans the surfaces of the metal so that the solder can bind and ensures even flow of the molten metal. Modern lead-free solder melts at 250 degrees Celsius.
These solders must be reinforced with something else, hence the nuts and bolts. Low melt soldered joints have comparatively little tensile strength. On the other hand, the solder runs neatly along the joint and is generally unobtrusive and well-behaved, though do make sure that any surplus flux is cleaned away. If something has gone wrong, you can melt the solder, clean carefully and start again.
If the assembly is square and true, the axle boxes can be slipped into place make sure that you have a smooth running fit. For this, engineering glue, usually Loctite, is used. Now fit the axles and wheels.
You should have a smooth, running chassis.
Soldering the next part is no longer an option, otherwise your existing joins will fall apart when heated. Loctite glue has the advantage of not needing heat. At the same time, it and other glues need respect and understanding.
Soldering flux removes any films of corrosion or grease; glues on the other hand depend on careful preparation beforehand. Clean well! Another important point, glue tends to flow everywhere. Care is needed, a little at a time only! Unlike soldering, Loctite needs an hour at room temperature to harden – ‘curing’ in the jargon.
If you have second thoughts, the Loctite bond can be broken with heat, so check before it is too late. To rephrase the old proverb, check three times, glue once!
Loctite is also recommended to set the motion. Once again, respect the nature of Loctite. The leading crank has to be set first and left to cure. If all is well then tackle the other side. When both sides are running properly, pinning (with 10BA bolts) can take place. With the wheels and connecting rods in place, the locomotive begins to take on its true character.
At this point, the cosmetic gearbox is added, plus the drive shaft. There is a lot of white metal, some of it for show but concealing working parts in brass. The white-metal parts are fixed together before mounting. As these parts are assembled ‘off-line’ so to speak, most parts are soldered, with the occasional dab of superglue. For obvious reasons, it is important that the solder is low melt or the white metal itself would begin to liquefy. The same considerations about pre-cleaning, flux and after-care apply as above.
The alternative is epoxy resin. Malcolm is not very fond of epoxy. It is true that soldering seems a bit of a faff, especially if you do not have a selection of soldering irons and other devices. On the other hand, proper use of epoxy resin is harder work than you might think.
To produce the desired polymer, it must be pre-mixed and the right amount of hardener/curative added, an important ingredient allowing resistance, durability etc. Once this curative is added to the mix, it heats up. No heat, no reaction, no polymer!
Most epoxy resin kits on sale to the public only contain a small amount of curative. Rather than going to the bother of adding the recommended amount and mixing, mixing, mixing, people add curative to excess. Surprise, surprise, the stingy allowance in the tube is soon used up. Many customers resort to purloining someone else’s tube, so if you buy an popular Epoxy Resin kit from a large retailer, check that the product still has its little tube of curative.
Alternatively, use low-melt solder!
The electrical system needs specialist electrical solder. Epoxy resin will NOT do here as it is a polymer with high electrical resistance! The circuit is wired up ‘off-line’ so have no fear of melting the metal. Once assembled the electrics and gears are bolted into place and transmit drive to the axles through the jack shaft. If this has been assembled properly, all will be well.
The basic cab structure is assembled separately using slot-and-tab construction originally designed by David Sharp of Modern Outline Kits. Nickel-steel etched plates are folded up. These plates are all numbered on the ‘waste’ side of the etch. Do not cut out components until they are needed; otherwise you end up with a pile of USOs – unidentifiable sharp objects. After detaching a piece and before working it, draw a file over the underside edges which otherwise might give you a nasty cut. Wearing fine gloves may also help.
The fold-lines are all indicated on the underside of the etch. When Malcolm has to make a right angle, he adapts his vice into a forming tool with two 15mm (6”) lengths of square 18mm ( ¾ “) angle. He lines up the fold-line, tightens the vice and then bends with care.
The cab roof is gently curved and needs a different forming tool. Malcolm recommends a cloth folded up to form a generous pad. He also recommends practising on scrap brass or nickel silver before attacking the etch!
As long as this done neatly, the plates can tabbed into each other and soldered. Low melt solder will do – even super-glue.
Saturday, 1 May 2021
Proud owners of a 16mm Baldwin Gas Mechanical
There are things we believe to be beautiful, things we know to be useful and another category of precious stuff. These are our playthings.
Don’t be misled by a word rooted in ‘play’. These ‘toys’ have stimulated curiosity, companionship, competition and rivalry. They bind together the events and processes of the world. They are prized objects which encapsulate a personal or national history. A model of a Baldwin Gas Mechanical, also known as a petrol locotractor, brings together two chapters of human history. Every knobble and bump tells a story. The battered prototype in this picture has many tales to tell. If you want to create new stories, you can run it on your layout. Otherwise you can keep it on display.
The Baldwin Gas Mechanical model is not beautiful in the conventional sense. It was made for running on a 32mm gauge layout with other models and with other Sixteen Millers. The model is accompanied by challenge, fun and companionship. We have been called the playful animal. Cubs and calves put off childish things when they enter the adult world; we don’t ever, quite.
Running a model on a layout is fun. It also brings back a lost world, a world of conflict in the case of Baldwin Gas Mechanical. (First World War 1914-18) Once the war had ended, the BGM was repurposed for a world in flux. Beneath the fun, we are looking at a tribute and memorial.
The original design for the Baldwin Gas Mechanical was created in 1916 during the 1914-18 War. In 1914, instead of a rapid invasion of Paris or Berlin, the combatants dug in along the Western Front. On each side of the Front, a million or so soldiers faced each other. The quantity of food, water ammunition etc required was mind-boggling. Given the technology of the time, the most practical means of transport was the portable railway with specially designed Prime Movers and wagons. Back in the 1880s, Prosper Péchot had devised a 60cm gauge system for the French Army. In 1888, the Péchot system was copied by the Germans and much developed.
The steam locomotives used in the 19th century soon proved unsuitable for trench war-fare, puffing out highly visible clouds of smoke in daylight and showers of sparks at night. Railway design rapidly looked to petrol power, electric and even, in a German locomotive, to diesel. Although the Eastern Front never had lengthy and extensive trench warfare, some narrow gauge petrol powered locomotives were needed.
The USA was a power-house of internal combustion engines. The mighty Baldwin Locomotive Works of Philadelphia, for instance, was relatively close to the thriving motor industries of Detroit. In 1916, some petrol-powered ‘locotractors’ were delivered to Russia. Soon after, the French Army ordered their own ‘locotracteurs’ to a slightly different design and to 60cm gauge, 600 units in all. The Wrightscale model seen above and below has used this design.
In April 1917, the USA entered the War. Among their first military orders were 126 Baldwin locotractors, known as Baldwin Gas Mechanicals, to the French design, and a further 65 more compact BGMs. The British never placed an order during the war but a very celebrated BGM made its way to Britain after the War. See below.
Sadly we know of no surviving examples of the Russian design but a number of locotractors – Baldwin Gas Mechanicals – have survived. After 1919, surviving locomotives and rolling stock were sold off, to quarries, agricultural concerns such as sugar beet producers and manufacturers eg beet refineries. A celebrated BGM survives on the Ffestiniog preserved railway. It was originally acquired in the 1920s when the railway served slate quarries. It was re-engineered in the 1950s and given the name Moelwyn to celebrate the mountain Moelwyn Mawr, site of many quarries.
The BGM in our first photograph was snapped by Malcolm at Tacots des lacs circa 2000. It was originally a US locomotive; you can tell, not just from the ‘U.S.A.’ painted on the side, but also the number 7108. Baldwin supplied 126 locotractors to this design to the AEF, numbered 7001 to 7126. The locomotive has had a hard life, losing its wheels and running gear as well as its chimney and lamps.
Tacots des lacs (lakeside jalopies) was created by enthusiasts in flooded and abandoned sand workings. At the time, they had rescued a lot of 60cm gauge material as well as the BGM pictured – on the understanding that they were restored.
In case you were asking, the battered locomotive standing behind is possibly a mash-up of locomotive parts. Eric Fresné describes just a chimera. Its lower part consisted of a steam chassis upon which was built a diesel loco.
Malcolm fell in love with the locomotive preserved at Froissy, seen in a photo taken in the 1990s. Delivered by Baldwin to the French Army, it had already been lovingly restored to museum quality. It has long been designated a Monument de France.
For the reasons given above, he realised straightaway that a model would be a fine addition to a 16mm scale layout and he has been making them for roughly thirty years. The historians Stuart Baker, Eric Fresné, Dr Christian Cénac and Rich Dunn all have a soft spot for this piece of military hardware.
See Richard Dunn ‘Narrow Gauge To No Man’s Land – US Army 60cm railways of the First World War in France’ Benchmark Press
Eric Fresné ‘70 years of sugar beet railways in France’ LR Presse see especially page 103
Sarah Wright ‘Tracks To The Trenches’ Birse Press
For images of Moelwyn search www.festipedia.org.uk
Subscribe to:
Posts (Atom)






































